ML_DLASET – Initilizes the off-diagonal elements and the diagonal elements of a matrix to given values

Block SymbolLicensing group: STANDARD

Function Description
The output reference yA is always set to the corresponding input references uA. If HLD = on then nothing is computed otherwise the LAPACK function DLASET is called internally:

DLASET(sUPLO, M, N, alpha, beta,uA, LDA);

where parameters of DLACPY are set in the following way:

Integer input uplo is mapped to the string sUPLO: ${0, 1} \to "A"$ , ${2} \to "U"$ and ${3} \to "L"$ .
M is number of rows of the matrix referenced by uA.
N is number of columns of the matrix referenced by uA.
LDA is the leading dimension of the matrix referenced by uA.

The error flag E is set to on if:

the reference uA is not defined (i.e. input uA is not connected),

See LAPACK documentation [7] for more details.

Inputs

uA	Input reference to matrix A	Reference
uplo	Part of the matrix to be set $⊙$ 0.00E+00	Long(I32)
	0 .... All 1 .... All 2 .... Upper 3 .... Lower
alpha	Scalar coefficient alpha $⊙$ 0.0	Double (F64)
beta	Scalar coefficient beta $⊙$ 0.0	Double (F64)
HLD	Hold	Bool

Outputs

yA	Output reference to matrix A	Reference
E	Error indicator	Bool

[Previous] [Back to top] [Up] [Next]