MX_CNMUL – Multiply a Matrix/Vector by a scalar

Block SymbolLicensing group: STANDARD

Function Description
The function block MX_CNADD multiplies each matrix/vector element referenced by uAX by the value of the input alpha and the result is stored to the matrix/vector referenced by uBY. If HLD = on then nothing is computed.

The output references yAX and yBY are always set to the corresponding input references uAX and uBY. The dimensions of the matrix/vector referenced by uBY are set to the dimensions of the matrix/vector referenced by uAX if they are different.

The error flag E is set to on if:

the reference uAX of uBY is not defined (i.e. input uAX or uBY is not connected),
the count of allocated elements of the matrix/vector referenced by uAX is different from the count of allocated elements of the matrix/vector referenced by uBY.

Inputs

uAX	Input reference to the matrix A or vector X	Reference
uBY	Input reference to the matrix B or vector Y	Reference
alpha	Scalar coefficient alpha	Double (F64)
HLD	Hold	Bool

Outputs

yAX	Output reference to the matrix A or vector X	Reference
yBY	Output reference to the matrix B or vector Y	Reference
E	Error indicator	Bool

[Previous] [Back to top] [Up] [Next]