SSW – Simple switch

Block SymbolLicensing group: STANDARD

Function Description
The SSW block selects one of two input signals u1 and u2 with respect to the binary input SW. The selected input is copied to the output y. If $SW = off$ ( $SW = on$ ), then the selected signal is u1 (u2).

Inputs

u1	First analog input of the block	Double (F64)
u2	Second analog input of the block	Double (F64)
SW	Signal selector	Bool
	off .. The u1 signal is selected, $y = u1$ on ... The u2 signal is selected, $y = u2$

Output

y	Analog output of the block	Double (F64)

[Previous] [Back to top] [Up] [Next]