VTOR – Vector demultiplexer
Block SymbolLicensing group: STANDARD
Function Description
The VTOR block splits the input vector signal into individual signals. The user defines the
starting item and the number of items to feed to the output signals using the offset and N
parameter respectively.
Input
uVec | Vector signal | Reference |
Parameters
n | Number of valid outputs 0 8 8 | Long (I32) |
offset | Index of the first output 0 | Long (I32) |
Outputs
y1 | Analog output of the block | Double (F64) |
y2 | Analog output of the block | Double (F64) |
y3 | Analog output of the block | Double (F64) |
y4 | Analog output of the block | Double (F64) |
y5 | Analog output of the block | Double (F64) |
y6 | Analog output of the block | Double (F64) |
y7 | Analog output of the block | Double (F64) |
y8 | Analog output of the block | Double (F64) |
[Previous] [Back to top] [Up]
2020 © REX Controls s.r.o., www.rexygen.com