ARLY – Advance relay

Block SymbolLicensing group: STANDARD
PIC

Function Description
The ARLY block is a modification of the RLY block, which allows lowering the amplitude of steady state oscillations in relay feedback control loops. The block transforms the input signal u to the output signal y according to the diagram below.

PIC

Input

u

Analog input of the block

Double (F64)

Output

y

Analog output of the block

Double (F64)

Parameters

ep

Value for switching the output to the "On" state  -1.0

Double (F64)

en

Value for switching the output to the "Off" state  1.0

Double (F64)

tol

Tolerance limit for the superposed noise of the input signal u   0.0 0.5

Double (F64)

ap

Value of the y output in the "On" state  1.0

Double (F64)

an

Value of the y output in the "Off" state  -1.0

Double (F64)

y0

Initial output value

Double (F64)

2020 © REX Controls s.r.o., www.rexygen.com