POUT – Pulse output

Block SymbolLicensing group: STANDARD
PIC

Function Description
The POUT block shapes the input pulses U in such a way, that the output pulse Y has a duration of at least dtime seconds and the idle period between two successive output pulses is at least btime seconds. The input pulse occuring sooner than the period of btime seconds since the last falling edge of the output signal elapses has no effect on the output signal Y.

Input

U

Logical input of the block

Bool

Output

Y

Logical output of the block

Bool

Parameters

dtime

Minimum width of the output pulse [s]  1.0

Double (F64)

btime

Minimum delay between two successive output pulses [s]  1.0

Double (F64)

2020 © REX Controls s.r.o., www.rexygen.com