SR – Set-reset flip-flop circuit

Block SymbolLicensing group: STANDARD
PIC

Function Description
The SR block is a flip-flop circuit, which sets its output permanently to on as soon as the input signal S1 is on. The other input signal R resets the Q output to off, but only if the S1 input is off. The NQ output is simply the negation of the signal Q.

The block function is evident from the inner block structure depicted below.

PIC

Inputs

S1

Priority flip-flop set, sets the Q output to on, overpowers the R input

Bool

R

Flip-flop reset, sets the Q output to off

Bool

Outputs

Q

Flip-flop circuit state

Bool

NQ

Boolean complementation of Q

Bool

2020 © REX Controls s.r.o., www.rexygen.com