RLIM – Rate limiter

Block SymbolLicensing group: STANDARD
PIC

Function Description
The RLIM block copies the input signal u to the output y, but the maximum allowed rate of change is limited. The limits are given by the time constants tp and tn:

the steepest rise per second: 1/tp
the steepest descent per second: 1/tn

Input

u

Input signal to be filtered

Double (F64)

Output

y

Filtered output signal

Double (F64)

Parameters

tp

Time constant defining the maximum allowed rise  2.0

Double (F64)

tn

Time constant defining the maximum allowed descent (note that tn > 0)  2.0

Double (F64)

2020 © REX Controls s.r.o., www.rexygen.com